NRC Precision Tape Roll Converting Making Machine

NRC 1300 Tape Slitting Rewinding Machine is an essential piece of equipment for converting large rolls of adhesive tape into saleable consumer or industrial products.   

NRC1300 MODEL tape slitting rewinding machine main parts:

1. Unwind Stand: Holds the large master roll. It can be a simple shaft or a more advanced motorized unwind with tension control to prevent stretching or breaking.

2. Web Guides: Ensure the tape runs straight and evenly through the machine, preventing misalignment.

3. Slitting Unit: The heart of the machine. This is where the cutting happens. There are different slitting methods (see below).

4. Rewind Shafts: Where the new, smaller rolls are built. The number of shafts determines how many rolls can be produced simultaneously.

5. Tension Control System: Crucial for producing tight, evenly wound rolls. It can be mechanical, magnetic particle, or servo-driven.

6. Drive System: The motor(s) that power the unwinding and rewinding process.

7. Control Panel: Often a PLC (Programmable Logic Controller) and HMI (Human-Machine Interface) touchscreen for setting parameters like speed, length, and tension.

If you are looking to purchase one, here's what to think about:

• Tape Type: What is the backing material (PP, PVC, cloth, paper)? What is the adhesive (acrylic, rubber, silicone)?

• Master Roll Dimensions: Max roll width and diameter (O.D.) the machine can handle.

• Finished Roll Specifications: Desired roll widths, core inner diameter (I.D.), and finished roll O.D.

• Production Speed: Measured in meters/minute or feet/minute. What is your required output?

• Slitting Method: Choose based on your tape type (see section above).

• Tension Control: Precise tension is vital for quality. Ensure the machine's system is suitable for your material.